技术文章首页 > 技术文章 > 真空隔离截止阀用途
真空隔离截止阀用途
点击次数:2337      更新时间:2014-11-14

                         真空隔离截止阀用途

                        上海申弘阀门有限公司

    真空隔离截止阀产品概述:截止阀的阀杆轴线与阀座密封面垂直。阀杆开启或关闭行程相对较短,并具有非常可靠的切断动作,使得这种阀门非常适合作为介质的切断或调节及节流使用。真空隔离截止阀的阀瓣一旦处于开启状况,它的阀座和阀瓣密封面之间就不再的接触,并具有非常可靠的切断动作,合得这种阀门非常适合作为介质的切断或调节及节流使用。上海申弘阀门有限公司主营阀门有:截止阀,电动截止阀,气动截止阀,电动蝶阀,气动蝶阀,电动球阀,气动球阀,电动闸阀,气动闸阀,电动调节阀,气动调节阀,减压阀水力控制阀真空阀门、衬胶阀门、衬氟阀门。截止阀一旦处于开启状态,它的阀座和阀瓣密封面之间就不再有接触,因而它的密封面机械磨损较小,由于大部分截止阀的阀座和阀瓣比较容易修理或更换密封元件时无需把整个阀门从管线上拆下来,这对于阀门和管线焊接成一体的场合是很适用的。介质通过此类阀门时的流动方向发生了变化,因此截止阀的流动阻力较高于其它阀门。☆结构特点与用途Strucurefeaturesandusages:

1、全关时手轮按顺时针方向旋转;

2、可以安装在管道的任何位置上,介质从下往上流;

3、不锈钢截止阀适用于各类腐蚀性介质的管道上,有良好的防腐性和足够的强度;

4、合金钢截止阀适用于耐高温的蒸汽、油品管道上,具有耐高温特点

1、本真空隔离截止阀系列阀门主体采用铸锻结构,真空隔离截止阀具有平行双密封副半强制双向密封,
2、密封面到位运动和楔形块楔紧运动分步作用实现零泄漏。密封面运动磨擦力小、启闭轻便,而且密封面磨损有自动补偿功能。 
3、真空隔离截止阀结构简单、紧凑、检修方便,使用寿命长。 
4、阀盖填料室设有真空密封结构,具有自胀压紧作用,并且各接各面采用高强膨胀材料密封,便系统与大气*隔离,具有很好的系统气密性。 
5、本真空隔离截止阀门连接形式分法兰、焊接两种,驱动方式有手动、该阀门适用于工作温度≤425℃和≤550℃,工作介质为水、凝和真空负压系统,起真空隔离密封作用。电动两种。蒸汽或空气的管路上,作为启闭装置:尤其适用于火电电厂汽机冷

产品说明单位数量单价 不含税单价 含税  总价规格型号     
90°热压弯头22  PN4.0  DN250,20钢     
无缝钢管5050  ?60×3.5,20钢     
截止阀22600 J61H-25 DN50  接管?60×3.5     
疏水阀11500 CS67H-25  DN50  接管?60×3.5     
真空截止阀11800 DkJ61H-25  DN50  接管?60×3.5     
气动真空截止阀113200 DkJ661H-25  DN50  接管?60×3.5     
无缝钢管160160  ?48×2.5,20钢     
90°热压弯头3030  PN4.0  DN40,20钢     
变径管11  PN4.0  DN40/DN25  连接管道?48×2.5/?32×3,20钢     
无缝钢管5050  ?133×4,20钢     
手动闸阀221050 Z61H-25 DN100     
            

真空截止阀连接形式分法兰、焊接两种,驱动方式有手动、电动两种。
真空截止阀主要零件的材料说明:
阀体 25、WCB Cr5Mo
阀盖 25、WCB Cr5Mo
进口真空截止阀结构简单、紧凑、检修方便,使用寿命长。
阀杆 2Cr13 38CrMoAL、25Cr2MoV
真空阀隔离阀阀座 25、304 304
密封环 膨胀柔性石墨
产品按JB/T3595标准设计制造,满足电站设备配套使用要求。

Chief structure features and usages 
1.The main body of this series valve uses a casting and forging structure and has a duai-direction seal of parallelsecondary semi-forced dual—sealing and the motions of both the sealing face tO its due position due pidition and the tapered block to wedge up are sepa rated to have zero leadage come true. 
2.The sealing face is of a small frictjonal force if motion,lightly opened and closed and has a self copensation function for wea ring. 
3.Simple and compact structure easy to more than 10 years of long duration. 
4. A vacuum sealing structureis set in the filling chamber on the valve cover, which has the action of self-expanding and impacting,the joint faces are seal ing with the ecpansive material of high strength to compley isolate the system from air. 
5.Two comectin gways of b flange and wefding.two ways to drive of heand-and eletric-ope ration. The valve can be used as the open&cloe device for the pipelines under the working temperature≤425℃and≤550℃ and the working medium of water, steam or air:especially suitable to act as the vacuumisol ating sealing for the system of eteam turbine’s eondesation and vacuum negative pressure in steam power plants.与本文相关的论文有:矿山电动插板阀